Ricoh GR III - Introduction; Checking the Contents of the Package

13
Q: What is the function of [B(Bulb)], [T(Time)] and [BT(Bulb Timer)] ?
A: You can select B, T and BT for the shutter speed in M mode.
Shutter Speed
Function
B (Bulb) The image continues to be exposed while the shutter release button is
pressed. The exposure ends when the shutter release button is released.
T (Time)
The exposure begins when the shutter release button is pressed.
The exposure ends when the shutter release button is pressed again.
BT:(Bulb Timer)
The exposure begins when the shutter release button is pressed and ends
at set time. The exposure time can be set by [Control Dial ( )].
*The following function are available at [B] and [T] setting.
・Single Frame Shooting
・Multiple Exposure Shooting
*The following function are available at [BT] setting.
・Single Frame Shooting
・Multiple Exposure Shooting
・Interval Shooting
・Interval Composite
*Operation is also possible using the optional Cable Switch (CA-3) with the USB Cable.
*The [One Push AE in M Mode] of [Fn Button Setting] at the
C
□
,2[Customize Controls] menu is not
available
,
Q: What is the function of [Interval Shooting] ?
A: The camera takes pictures automatically at the fixed interval time.
Set the [Drive Mode] at the
□
,4[Shooting Setting] menu or [Drive Mode Button] of the [Direct Key].