Select [INT] and press [Fn] button. Set above 4 items
Set interval time from 00:01 to 60:00
Set the number of shots as [
∞
Set the timing of first shot as [NOW] or [Set Time]
Set the Times of Day if you select [Set time] at [Start Interval]
・Depend on the shooting settings, the time until next shot may longer than time that set at Interval.
・When the [OK] button is pressed, the interval shooting is cancelled.
・It is created and saved new folder for each interval shooting.
・When one of the [MF], [Snap] or [∞] is selected for [Focus] mode at the
□
,1[Focus Settings] menu,
the focus point is fixed to the point of first shot.
・It is recommended to use the battery with sufficient power or optional AC Adapter(D-AC116).
Q: What is the function of [Interval Composite]?
A: A series of continuous images taken at set intervals is merged in such a way that the bright areas remain.
Use this function when you want to record the trails of light formed by stars and so on during nightscape
shooting. It is also possible to keep image between shots
・Set [Drive Mode] at the
□
,4Shooting Settings] menu or [Drive Mode Button] of [Direct Key].
Select
, and press [Fn]. Set above 4 items
Set interval time from 10 minutes to 24 hours
Set the timing of first shot as [NOW] or [Set Time]
Set the Times of Day if you select [Set time] at [Start Interval]
Set if save or not images before composite or middle of composite.
It is saved as JPEG format for image that middle of composite.
To Next Page
Loading...
