6
T
echnical
B
ulletin
PAGE: 6/8
Model:
Model U-P1 Date: 20-Aug-04 No.: RG071014
select the printout with the most closely aligned grid pattern. Then set SP2-950-4 to the value that
produced that print.
A4/LT printing:
Compare the grid pattern near the trailing edge of the third sheet of each setting (initial, +1, -1). Then
select the printout with the most closely aligned grid pattern. Then set SP2-950-4 to the value that
produced that print.
Additional information for printing out the test pattern
1. Select SP5-955 to 5 and set SP2-917 to 1 (Enable test pattern).
2. Leave SP mode.
3. Press the on-line key to select “Online”.
4. Start an application that can let you print in colour, such as Microsoft Word.
5. Input 4 letters in each color (KCMY) as shown. The colours do dot have to be exactly cyan, yellow,
and magenta; just use something that is as close as possible.
6. Print out 2 A3 / DLT pages (or 4 A4 / LT pages).
7. Return the setting of SP2-917 to 0 (or turn off the main switch) to reset the machine for normal
printing after you print out the test pattern.
BCD
To Next Page
Loading...
