CorelDRAW X5 Setup
To setup Corel Draw X5 follow the steps below:
1. Before opening Corel Draw you need to install the Xpres Sublimation Colour Profile, this can be downloaded
from or can be found on the Subli Print CD supplied.
Save the Colour Profile on to your Desktop (drag and drop if taking from the supplied CD). Now Right Click the
Colour Profile (Ricoh 7000 v1.15) and select ‘Install’ - There will be no confirmation that the file has been installed.
Note: If this ‘install’ option does not appear change the
file extension from ‘.ICM’ to ‘.ICC’ and repeat the
above.
2. Now open Corel Draw and open a new page. Click on Window > Colour Palettes. Click on ‘Default RGB Palette’.
Repeat the above and click ‘Default CMYK Palette’ to deselect this option. The Colour Palette menu should
appear as shown below.
www.xpres.co.uk/downloads
14
To Next Page
Loading...
