For Users of This Product
Thank you for purchasing this product.
This product is equipped with a Wireless LAN function. The wireless LAN function is
disabled as a factory default.
This document describes precautions about using the product's wireless LAN function. Be
sure to read this document before using the product, and keep it safe for future reference.
Be sure to read this document before using the wireless LAN function.
The product uses the 2.4 GHz frequency range for communication. Communications using radio
waves may be interrupted by noise or interference. If you want to use this product for external
communication, please be aware that communication failures may occur.
It is prohibited by law to disassemble or modify this product. The company takes no •
responsibility for illegal modications that are made to the wireless LAN module of this
product.
The company takes no responsibility for nancial losses, such as damages incurred due to •
communication failures, arising from failures, malfunctions, or defects of the wireless LAN
function, or arising from the operating environment, communication failures, power outages,
or other external factors.
No measures to prevent or block data tampering are available for devices that use radio •
waves for communication. The company takes no responsibility for security problems arising
due to wireless LAN specications or other conditions.
The frequency range used by this product may also be used by other products (industrial, •
scientic, or medical devices) manufactured by other companies. The outdoor use of wireless
devices may be restricted. Pay attention to where you use this function.
To export this product, conform with the Foreign Exchange and Foreign Trade Act, the •
Export Administration Regulations, and other related laws and regulations, and conduct the
necessary proceedings specied by them.
This function's SSID is not congured as a factory default. If you want to use SSID, you must •
congure the SSID setting yourself.
Some applications of this product use the wireless LAN function. Depending on the •
environment where you use the wireless LAN function, communication may be interrupted
due to radio wave interference.
Usable frequencies vary depending on the access point you use.•
The wireless LAN function is disabled as a factory default. To use the applications of this •
product that use the wireless LAN function, you need to enable the wireless LAN function.
r
To service representatives (in the case of installation by service representatives only):
Give this document to the user when the installation of this product is complete.
© 2013
Printed in Japan
EN US EN
GB EN AU
D150-1462
To Next Page
Loading...
