Need help?Do you have a question about the Ricoh MP 2014D and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Print Resolution | 600 x 600 dpi |
| Scan Resolution | 600 dpi |
| Paper Capacity | 250 sheets |
| Duplex Printing | Manual |
| Connectivity | USB 2.0 |
| Type | Monochrome |
| Maximum Paper Size | A3 |
| Power Source | 220 - 240 V, 50/60 Hz |
| Dimensions | 587 x 581 x 461 mm |
| Weight | 29 kg |
| Functions | Print, Copy, Scan |
| Copy Resolution | 600 x 600 dpi |
| Print Speed | 20 ppm |
| Copy Speed | 20 cpm |
| Power Consumption | Approx. 1.2 kW |
Explains various Service Call (SC) codes, their causes, and solutions.
Describes how to detect and identify paper jams within the machine.
Provides crucial safety instructions for users and technicians.
Specific instructions to avoid physical harm during operation or maintenance.
Guidelines related to health hazards from toner, developer, and ozone.
Standards for electrical safety compliance during installation and maintenance.
Guidelines for safe and environmentally responsible disposal and toner handling.
Safety precautions related to the laser unit to prevent eye damage.
General safety measures before performing maintenance or moving the machine.
Explains different headings for special information like warnings and cautions.
Outlines the necessary conditions before installing the machine.
Specifies environmental conditions for machine installation.
Specifies the clearance needed around the machine for installation.
Outlines the electrical power specifications and grounding requirements.
Step-by-step instructions for installing the DF Model (D247).
Steps to verify image quality and settings after installation.
Adjusting paper registration for multiple paper feed units.
Step-by-step guide for replacing preventive maintenance parts.
Details how to adjust scanner parameters after replacement.
Steps for replacing the laser unit and fan duct.
Crucial precautions before handling the PCU or development unit.
Detailed steps for removing and replacing the PCDU.
Steps for replacing the OPC drum.
Instructions for replacing the charge roller and cleaning brush.
Steps for replacing the cleaning blade.
Procedures for handling and installing the developer.
Procedures to follow after replacing or adjusting PCDU components.
Steps for removing and replacing the fusing unit.
Procedure for adjusting the nip band width of the fusing unit.
Instructions for replacing the Micro Processing Unit (MPU).
Steps for replacing the EEPROM chip.
Instructions for replacing the Power Supply Unit.
Steps for replacing the high-voltage power supply board.
Instructions for replacing the main motor.
Procedures for adjusting printing registration after replacement.
Adjusting the main scan magnification.
Adjusting registration for scanning in platen mode.
Adjusting magnification for scanning.
Adjusting registration for ADF image scanning.
Adjusting sub scan magnification for ADF.
Lists functions and information available in the maintenance mode menu.
Details the special maintenance menu, including serial number display.
SP codes related to paper handling adjustments and settings.
SP codes related to drum and charge roller adjustments.
SP codes for adjusting scanner parameters.
Step-by-step instructions for preparing and updating the machine's firmware.
Information on common firmware update errors and their solutions.
Explains the four levels of service call conditions and reset procedures.
Lists SC codes related to scanning errors and their solutions.
Lists SC codes related to exposure errors and their solutions.
Lists SC codes related to image processing errors and their solutions.
Lists SC codes related to paper feed and fusing errors.
Lists SC codes related to communication errors between units.
Explains jam codes and their positions on the machine.
Lists specific maintenance tasks and their intervals for the mainframe.
To Next Page