To Next PageTo Next PageHow to remove shadow from copies with pasted originals on Ricoh All in One Printer?
If a shadow appears on copies when using pasted originals with your Ricoh All in One Printer, the image density might be too dark. Adjust the image density. Also, change the orientation of the original and put mending tape over the pasted areas.
Why does my Ricoh All in One Printer misfeed frequently?
If your Ricoh All in One Printer is frequently misfeeding, the tray's side fences might not be locked properly. Ensure that the side fences are locked. Also, the tray's end fence might not be set correctly. Make sure the end fence is properly adjusted. Alternatively, you might be using a paper size not shown on the paper size selector. If using a non-standard size, use the Tray Paper Settings to manually set the paper size.
What to do if error message remains after removing misfed paper from Ricoh MP 2001 All in One Printer?
If an error message remains on your Ricoh All in One Printer even after removing misfed paper, it's because the message persists until you open and close the required cover. Clear the misfed paper, and then open and close the front cover.
What to do if Ricoh MP 2001 says "Memory is full. [Print] scanned orig., [Clear] to cancel/clear memory."?
If the Ricoh All in One Printer displays the message "Memory is full. [Print] scanned orig., [Clear] to cancel/clear memory.", it means the scanned original has more pages than the memory can hold. You can either press [Print] to copy the scanned originals and cancel the remaining data, or press [Clear] to cancel the entire scanning process without making copies.
What does "Cannot detect original size" mean on Ricoh All in One Printer?
If your Ricoh All in One Printer displays the message "Cannot detect original size", it could be due to an improperly placed original. In this case, select the paper size manually instead of using the Auto Paper Select function, and avoid using the Auto Reduce/Enlarge function. It is also possible that no original was placed on the printer. Place your originals.
Why are parts of the paper not copied on my Ricoh All in One Printer?
If your Ricoh All in One Printer is not copying parts of the paper, the original might not be placed correctly. Ensure you place the originals correctly. Also, an improper paper size might be selected. Select the correct paper size.
How to fix "Rotate Sort is unavailable with this paper size" on Ricoh All in One Printer?
If your Ricoh All in One Printer displays the message "Rotate Sort is unavailable with this paper size.", it means that the selected paper size is not compatible with the Rotate Sort function. Select a proper paper size.
How to fix "Check original orientation" on Ricoh MP 2001?
If your Ricoh All in One Printer displays the "Check original orientation." message, it means the original is not placed in the proper orientation. Change the orientation of the original.
Why is the display off on my Ricoh All in One Printer?
If the display of your Ricoh All in One Printer is off, it could be due to the Energy Saver feature activating. Turn on the operation switch. Alternatively, the operation switch might be turned off.
What to do if nothing happens when I turn on Ricoh MP 2001?
If nothing happens when you turn on the operation switch on your Ricoh All in One Printer, the main power switch might be turned off. Turn on the main power switch.
General| Print Resolution | 600 x 600 dpi |
|---|---|
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Supported Paper Sizes | A3, A4, A5, B4, B5 |
| Warm-up Time | 30 seconds |
| Functions | Print, Copy, Scan |
| Print Speed | 20 ppm |
| Copy Speed | 20 cpm |
| Zoom | 50% to 200% in 1% steps |
| Fax Transmission Speed | 33.6 kbps |
| Interface | USB 2.0 |
Crucial safety precautions for machine operation, environment, and handling.
Step-by-step instructions for powering the machine on and off correctly.
Step-by-step guide for performing a standard copy job.
Guide for administrators to access and modify machine settings.
Procedure for setting up user codes to restrict functions.
Common problems and their solutions for machine operation issues.
Detailed instructions and precautions for loading paper into trays.
Steps to remove jammed paper from various machine locations.
Recommendations for optimal machine placement and environment.
Instructions and safety precautions for connecting the machine to a power source.
