Ricoh MP 2001 - Changing a User Code

5. Select [Program] using the [ ] or [ ] key, and then press the [OK] key.
6. Enter the user code using the number keys, and then press the [OK] or [ ] key.
The "Programmed" message appears, and then the "User Code" display returns.
7. Press the [User Tools/Counter] key.
Changing a User Code
• Even if you change a user code, the counter value will not be cleared.
1. Press the [User Tools/Counter] key.
2. Select [System Settings] using the [ ] or [ ] key, and then press the [OK] key.
3. Select [Administrator Tools] using the [ ] or [ ] key, and then press the [OK] key.
4. Select [Program/Change User Code] using the [ ] or [ ] key, and then press the [OK]
key.
5. Select [Change] using the [ ] or [ ] key, and then press the [OK] key.
6. Enter the registered user code you want to change using the number keys, and then press
the [OK] or [ ] key.
• When you select the user code from the User Code List, press [List]. Select the user code you
want to change using the [ ] or [ ] key, and then press the [OK] key twice.
4. User Tools
90