2. Select the combine mode using the [ ] or [ ] key, and then press the [OK] key.
3. Select the orientation using the [ ] or [ ] key, and then press the [OK] key.
• You can select the orientation of originals and copying paper when [Always Specify] is
specified for [Orientation] under [Copier Features] (User Tools). See page 86 "Orientation".
If it was not specified for, proceed to step 4.
• To change the copy orientation, select the icon which orientation of originals is used.
The "Programmed" message appears.
4. Select the paper size using the [ ] or [ ] key.
5. Place your originals, and then press the [Start] key.
Series Copies
You can separately copy the front and back of a two-sided original or two facing pages of a bound
original onto two sheets.
2 Sided 1Sided
Copies each side of a two-sided original onto two separate pages.
3. Copying
66
To Next Page
Loading...
