Ricoh MP 2001 - Loading Paper

If You Cannot Make Copies As You Want
This section explains causes and remedies when copy results are not as expected.
Basic
Problem Causes Solutions
You cannot combine several
functions.
Selected functions cannot
be used together.
Check the combination of functions and
make the settings again.
• page 135 "Combination Chart"
Combine
Problem Causes Solutions
When using Combine, parts
of the image are not copied.
You specified a
reproduction ratio that does
not match the sizes of your
originals and copy paper.
When you specify a reproduction ratio
using the Manual Paper Select function,
make sure the ratio matches your
originals and the copy paper.
• Select the correct reproduction
ratio before using the Combine
function.
Your originals are not
identical in size and
direction.
Use originals that are identical in size
and direction.
Copies are not in correct
order.
You placed the originals in
the incorrect order.
When placing a stack of originals in the
ADF, the last page should be on the
bottom.
If you place an original on the exposure
glass, start with the first page to be
copied.
5. Troubleshooting
100