• Some of this machine's internal components get very hot. For this reason, take care when
removing misfed paper. Not doing so could result in burns.
• When removing jammed paper, make sure not to trap or injure your fingers.
• The inside of the machine could be very hot. Do not touch the parts with a label indicating the
"hot surface". Otherwise, an injury might occur.
• When clearing misfeeds, do not turn off the power switch. If you do, your copy settings are
cleared.
• To prevent misfeeds, do not leave any torn scraps of paper inside the machine.
• If paper misfeeds occur repeatedly, contact your service representative.
• More than one misfeed area may be indicated. If this is the case, check every applicable area.
Refer to the following charts: B, P, Y.
• You can find a sticker explaining how to remove misfed paper inside the right cover.
• When the machine instructs you to reset originals, reset them in the feeding position. The display
will show you the number of originals to return.
5. Troubleshooting
110
To Next Page
Loading...
