Ricoh MP 2001 - Troubleshooting; If Your Machine Does Not Operate As You Want

1. Press the [User Tools/Counter] key.
2. Select [System Settings] using the [ ] or [ ] key, and then press the [OK] key.
3. Select [Administrator Tools] using the [ ] or [ ] key, and then press the [OK] key.
4. Select [Counter per User Code] using the [ ] or [ ] key, and then press the [OK] key.
5. Select [Print] using the [ ] or [ ] key, and then press the [OK] key.
6. Press the [Start] key.
The counter list prints out.
7. Press the [User Tools/Counter] key.
Clearing the Counter
1. Press the [User Tools/Counter] key.
2. Select [System Settings] using the [ ] or [ ] key, and then press the [OK] key.
3. Select [Administrator Tools] using the [ ] or [ ] key, and then press the [OK] key.
4. Select [Counter per User Code] using the [ ] or [ ] key, and then press the [OK] key.
5. Select [Clear] using the [ ] or [ ] key, and then press the [OK] key.
A confirmation message appears.
6. Press [Yes].
The "Counter has been cleared." message appears, and then the "Codes:Counters" display returns.
7. Press the [User Tools/Counter] key.
User Code
93