1. Selection keys
Correspond to items at the bottom line on the display.
Example: initial copy display
• When the instruction "press [100%]" appears in this manual, press the left selection key.
• When the instruction "press [R/E]" appears in this manual, press the center selection key.
• When the instruction "press [Auto R/E]" appears in this manual, press the right selection key.
2. [Escape] key
Press to cancel an operation or return to the previous display.
3. [OK] key
Press to set a selected item or entered numeric value.
4. Scroll keys
Press to move the cursor to each direction one by one.
When the [ ], [ ], [ ], or [ ] key appears in this manual, press the scroll key of the same direction.
Common key operations
The following keys are common to all screens:
Key list
[Cancel] Deletes a selected function or entered values, and then the previous display returns.
[Exit] The previous display returns.
[Stop] Stops a job in progress.
[Yes] Acknowledges a selected function or an entered values.
[Stop] Cancels a selected function or entered values, and then the previous display returns.
Control Panel
29
To Next Page
Loading...
