Ricoh MP 2001 - Deleting a User Code

7. Enter the new user code using the number keys, and then press the [OK] or [ ] key.
The "Programmed" message appears, and then the "User Code" display returns.
8. Press the [User Tools/Counter] key.
Deleting a User Code
• This operation also deletes user codes registered to multiple functions. User control via the deleted
user code is no longer possible.
1. Press the [User Tools/Counter] key.
2. Select [System Settings] using the [
] or [ ] key, and then press the [OK] key.
3. Select [Administrator Tools] using the [ ] or [ ] key, and then press the [OK] key.
4. Select [Program/Change User Code] using the [ ] or [ ] key, and then press the [OK]
key.
5. Select [Delete] using the [ ] or [ ] key, and then press the [OK] key.
6. Select [Per User Code] or [All User Codes] using the [ ] or [ ] key, and then press the
[OK] key.
When selecting [All User Codes], a confirmation message appears. Press [Yes], and then proceed
to step 9.
User Code
91