2. Press [Reduce] or [Enlarge].
3. Select a ratio using the [ ] or [ ] key, and then press the [OK] key.
The "Programmed" message appears.
4. Place your originals, and then press the [Start] key.
Zoom
You can change the reproduction ratio in increments of 1%.
• You can also select a preset ratio close to the desired ratio using [Reduce] or [Enlarge], and then
adjust the ratio using the [ ] or [ ] key.
1. Press [R/E].
2. Press [Zoom].
3. Copying
58
To Next Page
Loading...
