Ricoh MP C3503 Administrator's Guide

7. Specifying [Facsimile Features]
The administrator must specify the settings in [Facsimile Features] within the ranges shown in the
following table.
For details about how to specify the settings, see "Facsimile Features", Fax.
Tab Item Settings
Initial Settings Menu Protect [Level 2]
General Settings Box Setting Set all items to [* Not Programmed].
Send Settings Backup File TX Setting [Off]
Reception Settings Reception File Settings
Store
[On]
Reception Settings Reception File Settings
Forwarding
[Off]
Reception Settings Reception File Settings
Print
[Off]
Reception Settings Reception File Settings
Memory Lock Reception
[Off]
Initial Settings Parameter Setting
switch 40, bit 0
[1]
If the memory for stored received faxes
become full, the MFP stops receiving new
faxes and keeps the stored ones without
printing or deleting them.
Initial Settings Parameter Setting
switch 10, bit 0
[1]
Only users who are authorized by the
administrator can access, from the
control panel, received faxes that are
stored.
Initial Settings Parameter Setting
switch 04, bit 7
[0]
If this is enabled, previews will not be
included in the reports.
Initial Settings Internet Fax Setting [Off]
Initial Settings Email Setting [On]
1. Notes for Administrators
20

Ricoh MP C3503 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	150, 000 pages
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes, 100 sheets
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Max Paper Size	A3
Print Speed	35 ppm (A4)
Maximum Paper Capacity	4, 700 sheets
Duplex Printing	Yes
Scan Resolution	600 dpi
Connectivity	USB, Ethernet
Paper Size	A3, A4, A5, B4, B5, B6
Copy Speed	35 cpm (A4)
Operating System Compatibility	Windows, Mac, Linux