1
Introduction
17
t Memo
• The LCD panel illumination and the viewfinder display can be
changed in [LCD Panel] of the E4 menu and [Viewfinder
Display] of the E4 menu, respectively. (p.108, p.107)
• No. 1 to 26 for the viewfinder display are the outside-field-of-
view information. The outside-field-of-view information is
displayed in the viewfinder when 0 is pressed halfway,
or during the meter operating time (default setting: 10
seconds). To not display the outside-field-of-view information,
change the [Info Display Outside FOV] setting in [Viewfinder
Display] of the E4 menu. You can change the meter
operating time in [Meter Operating Time] of the E5 menu.
(p.33)
• The functions currently enabled for the Smart Function and
their settings are displayed for No. 17 and No. 33 to 53. When
U is operated, the icons of registered functions appear,
and the icon of the currently selected function blinks. (p.19)
• You can adjust the viewfinder
image sharpness using the diopter
adjustment dial.
14 Warning Display (p.110) 35 Pixel Shift Resolution
(p.82)
15 Self-timer (p.73)
16 Battery level 36 AF Mode (p.60)
17 Smart Function (p.19) 37 AF Active Area (p.60)
18 Focus indicator 38 AE Metering (p.59)
19 HDR Capture (p.81) 39 EV Compensation (p.54)
20 Focus method (p.59) 40 Program Line (p.52)
21 File Format (p.48) 41 E-Dial
22 AE Lock 42 Flash Exposure
Compensation
23 Shake Reduction (p.83)
24 Pixel Shift Resolution
(p.82)
43 Custom Image (p.78)
44 Crop (p.48)
25 Anti-Aliasing Filter
Simulator (p.82)
45 Zoom Review
46 Outdoor View Setting
(p.13)26 Flash indicator (p.77)
27 Electronic level 47 HDR Capture (p.81)
28 Grid display (p.107) 48 Shake Reduction (p.83)
29 Cropping frame (p.48) 49 Focus Peaking (p.64)
30 AF Frame (p.45) 50 Hold AF Status (p.61)
31 Spot Metering Frame
(p.59)
51 ISO Sensitivity (p.57)
52 White Balance (p.74)
32 AF point (p.60) 53 Grid Guide
33 Drive (p.66) 54 Operation Control Lock
(p.46)
34 Anti-Aliasing Filter
Simulator (p.82)
Eye Sensor
The eye sensor detects whether
the user is looking through the
viewfinder in the standby mode
while shooting with the viewfinder.
When the sensor detects the
user’s eye, the monitor backlight
turns off and the metering starts.
The setting can be changed in
[Eye Sensor] of the E4 menu. (p.107)
The eye sensor may operate when an object is brought close
to it or it is exposed to direct sunlight. It is also used for the
automatic brightness adjustment of the monitor. (p.109)
To Next Page
Loading...
