Ricoh Pentax K-3 III - Image Editing and Processing

4
Playback
89
You can protect images from being accidentally deleted.
1 Select [Protect] in the C2 menu or on the
playback function selection screen.
2 Select [Protect 1 Image] or
[Protect All Images].
When [Protect All Images] is
selected, proceed to Step 4.
3 Use Q to select an image.
4 Press E.
When [Protect All Images] is selected, the confirmation
screen appears. Proceed to Step 5.
5 Select [Protect] and press E.
u Caution
• Even protected images are deleted if the inserted memory
card is formatted.
t Memo
• To cancel the protection for an image, set the protection for
the image again.
When [Auto Image Rotation] is set to [On] (default setting) in the
C1 menu, the image is automatically rotated based on the
rotation information during playback.
The rotation information of an image can be changed by
following the procedure below.
1 Display the image to rotate in the single image
display.
2 Select [Image Rotation] in the C2 menu or on
the playback function selection screen.
3 Use AB to select the
desired rotation direction
and press E.
The image rotation information is
saved, and the camera returns to
the single image display mode.
u Caution
• You cannot change image rotation information in the
following cases.
• Protected images
•Movies
• Images without a rotation information tag
t Memo
• You can save the rotation information at a specific angle in
[Save Rotation Info] of the E6 menu.
Protecting Images
C2
10:00
10:00
100-0001
100-0001
01/01/2021
01/01/2021
OK
OK
Protect All Images
Protect All Images
Protect 1 Image
Protect 1 Image
CancelCancel
Rotating Images
C2
Image Rotation
Image Rotation
Cancel
Cancel
OK
OK