2
Getting Started
25
1 Pass the end of the strap
through the protective
cover and triangular ring.
2 Secure the end of the strap
on the inside of the clasp.
1 Make sure that the camera is turned off.
2 Remove the body mount
cover (1) and lens mount
cover (2).
After removing the cover, be sure
to put the lens down with the lens
mount side facing upward.
3 Align the lens mount index
(red dots: 3) on the
camera and the lens, and
secure by turning the lens
clockwise until it clicks.
To remove the lens
Attach the lens cap turn the
lens counterclockwise while
pressing the lens unlock button
(4).
Attaching the Strap Attaching a Lens
3
4
To Next Page
Loading...
