40
1 Press D in standby mode.
2 Select a drive mode.
3 Press G to change detailed settings, and
press E.
4 Press E.
The camera returns to standby mode.
u Caution
• There are restrictions on some drive modes when used in
some capture modes or in combination with some other
functions. (p.45)
t Memo
•In C mode, you can select only [Remote Control Off] or
[Remote Control].
Setting the Drive Mode
Single Frame Shooting
(L)
Normal capture mode
Continuous Shooting
(Z, b)
Continuously takes pictures while
0 is kept pressed.
Self-timer
(O, P, Y)
Releases the shutter about 12
seconds or 2 seconds after
0 is pressed.
Remote Control
(Q, R, S)
Enables shooting with remote
control.
Bracketing
(T, 1, U)
Takes consecutive pictures at
different exposure levels.
Mirror Lock-up
Shooting
(c, d)
Takes pictures with the mirror
raised.
Multi-exposure
(V, z, W, X)
Creates a composite image by
taking multiple pictures and
merging them into a single image.
Interval Shooting
(q, U, V, w)
Automatically takes pictures at set
intervals.
Single Frame ShootingSingle Frame Shooting
CancelCancel OKOK
To Next Page
Loading...
