Ricoh Priport 1250 - Page 37

Preset Reduce/Enlarge—Reducing and Enlarging Using Preset Ratios
17
1
❖
❖❖
❖ Enlargement (Metric version)
❖
❖❖
❖ Enlargement (Inch version)
A
Select the desired reduction or en-
largement ratio using the {
{{
{
Re-
duce
}
}}
} key or the {
{{
{
Enlarge
}
}}
} key.
B
Make sure that the original and
the print paper are the correct
size.
C
Set your originals on the exposure
glass or in the optional document
feeder.
D
Press the {
{{
{
Start
}
}}
} key.
E
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {
Image
Position
} keys (see ⇒ P.9 “Shift-
ing the Print Image Position For-
ward or Backward”) or the side
tray fine adjusting dial (see ⇒
P.10 “Shifting the Print Image Po-
sition to the Right or Left”).
F
Make your prints.
Enlarge-
ment Ratio
Original
Size
Print Size
141 % B5 B4
A5 A4
122 % A4 B4
A5 B5
115 % B5 A4
B6 A5
Enlarge-
ment Ratio
Original
Size
Print Size
155 %
5
1
/
2
"
×
8
1
/
2
"
8
1
/
2
"
×
14"
129 %
5
1
/
2
"
×
8
1
/
2
"
8
1
/
2
"
×
11"
121 % — —
TSLS012E
SilverV-gb.book Page 17 Monday, May 15, 2000 3:32 PM