Energy Saving Functions
To reduce its power consumption, this machine has the following functions:
Energy Saver Mode
• If this machine remains idle for a specified period, it automatically enters Energy Saver Mode
to reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep Mode is 1 minute. This default
time can be changed.
• The machine can print jobs from computers while in Energy Saver Mode.
Specification
Reduced Electrical Consumption by Energy Saver Mode 9 W
Time of Switch into Energy Saver Mode 1 minute
Time of Switch out from Energy Saver Mode 13 seconds
• Specifications can vary depending on which options are installed on the machine.
• For details about how to change the default interval, see "1.System", Operating Instructions.
• Depending on which Embedded Software Architecture application is installed on it, the machine
might take longer than indicated to enter Energy Saver Mode.
4. Other Information for This Machine
16
To Next Page
Loading...
