When using a film without DX code, your camera will automatically set itself to ISO
100.
HOLDING YOUR CAMERA
1. Use both hands to steady your camera. (Figs. 19, 20)
2. Be careful not to place your fingers over the lens, flash, or focusing windows.
(Fig. 21)
* When holding vertically always position it with the flash at the top.4www.butkus.org
VIEWFINDER (Fig. 22)
1. Field of View Frame:
The subject (such as people or scenery) that you wish to take should be set within
this frame.
Parallax Correction Marks:
When taking a picture of subject that is between 0.8 m-- 1.2 m (2.6--4 ft.) away
from your camera, the subject should be positioned within these marks. Anything
outside the marks will not be included in the picture even if you can see it through
the viewfinder.
Auto Focus Frame:
The auto-focus system focuses automatically on any subject that appears within this
small circle.
To Next Page
Loading...
