Ricoh THETA SC2 User Manual

RICOH THETA SC2 - User Guide
file:///C|/r22/en/support/manual/sc2/content/prepare/prepare_04.html[2019/11/12 2:04:19]
Top
>
Preparation
>
Turning the Power On/Off
Turning the Power On/Off
When charging of the built-in battery is complete, turn on the power.
1. Press the power button.
The power lamp and OLED panel turn on.
Press the power button again to turn off the power.
Power Lamp
The lamp indicates the camera power status.
Lit in white:
The power is on.
Lit in green:
The battery is charging.
Flashing in red:
The power is turning off.
Unlit:
Charging is complete, the camera is in the sleep mode or light/sound off mode, or the power is off.
When the camera is connected to a computer with a USB cable, the lamp lights green and the battery is charged.
The lamp is unlit when charging is complete.
← Back
▲ Back to Top
© 2019 Ricoh Company, Ltd. All Rights Reserved.
Note

Ricoh THETA SC2 Specifications

General

Sensor type	CMOS
Total megapixels	24 MP
Optical sensor size	1/2.3 \
Effective megapixels (image)	12 MP
Wi-Fi	Yes
Product color	Blue
White balance	Auto, Cloudy, Daylight, Natural, Outdoor, Shade, Underwater
ISO sensitivity	64, 3200
Wi-Fi frequency	2.4 GHz
Camera interface	Micro-USB
Country of origin	Japan
Video resolutions	1920 x 960, 3840 x 2160 pixels
Maximum frame rate	30 fps
Number of microphones	1
Video formats supported	H.264, MP4, MPEG4
Maximum video resolution	3840 x 1920 pixels
Image formats supported	JPEG
Maximum image resolution	5376 x 2688 pixels
Still image resolution(s)	5376 x 2688
Storage media	Internal memory
Power source	Battery
Virtual Reality (VR) ready	No

Weight and Dimensions

Depth	100 mm
Width	180 mm
Height	70 mm
Weight	275 g