Ricoh THETA SC2 User Manual

RICOH THETA SC2 - User Guide
file:///C|/r22/en/support/manual/sc2/content/prepare/prepare_06.html[2019/11/12 2:04:20]
2. Press the wireless button.
The wireless LAN function is turned on, and flashes on the OLED panel.
3. Display the Wi-Fi
TM
settings of the smartphone.
4. Select the SSID of the camera from the network list and enter the password.
The serial number printed at the bottom of the camera is the same as the SSID and password.
The SSID is “THETA + Serial number indicated by (B) + .OSC” (in this case “THETAYP00001017.OSC”). The password
is the numbers indicated by (A) (in this case “00001017”).
The password can be changed using the basic app for smartphone.
Checking and Changing the Camera Settings
The password is initialized by pressing and holding the wireless button and mode button simultaneously while the
power is on. The power turns off automatically at this time.
When the wireless LAN connection is complete, becomes lit.
Date and Time Settings
The date and time of the camera are synchronized with the smartphone or computer when the camera is
connected to the basic app.
← Back
▲ Back to Top
© 2019 Ricoh Company, Ltd. All Rights Reserved.

Ricoh THETA SC2 Specifications

General

Sensor type	CMOS
Total megapixels	24 MP
Optical sensor size	1/2.3 \
Effective megapixels (image)	12 MP
Wi-Fi	Yes
Product color	Blue
White balance	Auto, Cloudy, Daylight, Natural, Outdoor, Shade, Underwater
ISO sensitivity	64, 3200
Wi-Fi frequency	2.4 GHz
Camera interface	Micro-USB
Country of origin	Japan
Video resolutions	1920 x 960, 3840 x 2160 pixels
Maximum frame rate	30 fps
Number of microphones	1
Video formats supported	H.264, MP4, MPEG4
Maximum video resolution	3840 x 1920 pixels
Image formats supported	JPEG
Maximum image resolution	5376 x 2688 pixels
Still image resolution(s)	5376 x 2688
Storage media	Internal memory
Power source	Battery
Virtual Reality (VR) ready	No

Weight and Dimensions

Depth	100 mm
Width	180 mm
Height	70 mm
Weight	275 g