Ricoh THETA SC2 User Manual

RICOH THETA SC2 - User Guide
file:///C|/r22/en/support/manual/sc2/content/prepare/prepare_09.html[2019/11/12 2:04:21]
Top
>
Preparation
>
Connecting to a
Bluetooth
®
Accessory
Connecting to a Bluetooth
®
Accessory
An accessory can be connected to the camera via Bluetooth
®
.
1. Turn on the power of the camera.
2. Set the Bluetooth
®
accessory to a pairing state or connection standby state.
See the manual of the Bluetooth
®
accessory for details.
3. Press and hold the self-timer button.
The camera enters the pairing state, and flashes on the OLED panel.
4. Connect the Bluetooth
®
accessory to the camera according to the manual of the accessory.
When the Bluetooth
®
accessory connection is complete, becomes lit.
Disconnecting the Bluetooth
®
Accessory from the Camera
1. Press and hold the self-timer button.

Ricoh THETA SC2 Specifications

General

Sensor type	CMOS
Total megapixels	24 MP
Optical sensor size	1/2.3 \
Effective megapixels (image)	12 MP
Wi-Fi	Yes
Product color	Blue
White balance	Auto, Cloudy, Daylight, Natural, Outdoor, Shade, Underwater
ISO sensitivity	64, 3200
Wi-Fi frequency	2.4 GHz
Camera interface	Micro-USB
Country of origin	Japan
Video resolutions	1920 x 960, 3840 x 2160 pixels
Maximum frame rate	30 fps
Number of microphones	1
Video formats supported	H.264, MP4, MPEG4
Maximum video resolution	3840 x 1920 pixels
Image formats supported	JPEG
Maximum image resolution	5376 x 2688 pixels
Still image resolution(s)	5376 x 2688
Storage media	Internal memory
Power source	Battery
Virtual Reality (VR) ready	No

Weight and Dimensions

Depth	100 mm
Width	180 mm
Height	70 mm
Weight	275 g