Ricoh THETA SC2 User Manual

RICOH THETA SC2 - User Guide
file:///C|/r22/en/support/manual/sc2/content/shooting-movie/shooting_movie_02.html[2019/11/12 2:04:28]
Top
>
Shooting Videos
>
Shooting Videos While
Connected to a
Smartphone
Shooting Videos While Connected to a Smartphone
You can capture videos using the basic app for smartphone.
1. Turn on the power of the camera.
2. Press the mode button to select the video shooting mode.
appears on the OLED panel.
3. Connect the camera to a smartphone via a wireless LAN or Bluetooth
®
.
Connecting to a Smartphone via Wireless LAN
Connecting to a Smartphone via Bluetooth
®
4. Start the basic app for smartphone.
5. Tap to start shooting.
The shooting is stopped when is tapped. (The shooting can also be stopped by pressing the shutter button of the
camera.)
Tap in the upper right-hand corner of the screen to change the video size, etc.
If a video is recorded while the camera is connected to a smartphone with the GPS function enabled, the position
information acquired when the shooting is started is recorded for the video.
When [Display after shooting] is turned on in [Shooting settings] and the shutter button of the basic app is used to
Note

Ricoh THETA SC2 Specifications

General

Sensor type	CMOS
Total megapixels	24 MP
Optical sensor size	1/2.3 \
Effective megapixels (image)	12 MP
Wi-Fi	Yes
Product color	Blue
White balance	Auto, Cloudy, Daylight, Natural, Outdoor, Shade, Underwater
ISO sensitivity	64, 3200
Wi-Fi frequency	2.4 GHz
Camera interface	Micro-USB
Country of origin	Japan
Video resolutions	1920 x 960, 3840 x 2160 pixels
Maximum frame rate	30 fps
Number of microphones	1
Video formats supported	H.264, MP4, MPEG4
Maximum video resolution	3840 x 1920 pixels
Image formats supported	JPEG
Maximum image resolution	5376 x 2688 pixels
Still image resolution(s)	5376 x 2688
Storage media	Internal memory
Power source	Battery
Virtual Reality (VR) ready	No

Weight and Dimensions

Depth	100 mm
Width	180 mm
Height	70 mm
Weight	275 g