RICOH THETA SC2 - User Guide
file:///C|/r22/en/support/manual/sc2/content/shooting-movie/shooting_movie_03.html[2019/11/12 2:04:29]
During countdown, the countdown sound is heard. Also, the remaining time is displayed on the OLED panel.
(When the remaining time is less than 2 seconds, the countdown sound interval becomes shorter.)
appears on the OLED panel during video recording.
Press the shutter button again to stop shooting.
The recorded video is saved in the internal memory of the camera.
Caution
If you press and hold the power button and wireless button to reset the camera while recording a video, the
internal memory may become damaged and may no longer be able to save data.
Videos may not be transferred to a smartphone depending on the video settings.
Videos may not be played back on a smartphone or computer depending on the video settings.
The camera may get hot if you record a video for a long period of time or perform shooting multiple times in
quick succession. In this case, the camera may stop operating to prevent damage from high temperatures.
Videos saved in the internal memory of the camera can be viewed on a smartphone or computer.
Viewing Captured Still Images and Videos
Importing Still Images and Videos to a Computer
Viewing Videos on a Computer
Videos saved in the internal memory of the camera can be deleted using the basic app for smartphone.
Deleting Captured Still Images and Videos
The default countdown time is 5 seconds.
Checking and Changing the Shooting Conditions
If the shutter button is pressed during countdown, shooting can be performed immediately.
(The self-timer is canceled.)
To cancel the self-timer, press the mode button.
(If the remaining countdown time is less than 2 seconds, the self-timer cannot be canceled.)
The countdown sound volume is linked to the shutter sound volume.
(When the shutter sound is off, the countdown sound is off either.)
The following operations are not available with the basic app for smartphone while recording videos.
Viewing images in the camera
Transferring images from the camera
Deleting images from the camera
The date and time of the camera are synchronized with the smartphone or computer when the camera is connected
to the basic app.
The camera automatically enters the sleep mode if no operations are performed for a set period of time (default
setting: 5 minutes). Shooting is not possible in the sleep mode. Press the power button to enable shooting, and then
press the shutter button to perform shooting.
If no more images can be captured, delete images from the camera.
Deleting Captured Still Images and Videos
Importing Still Images and Videos to a Computer
← Back
▲ Back to Top
© 2019 Ricoh Company, Ltd. All Rights Reserved.
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
