To Next PageTo Next Page
Need help?Do you have a question about the Ridder RW Series and is the answer not in the manual?
Document compliance with relevant European guidelines and harmonized standards.
Manual for qualified installers; professional competence required for safe work.
Lists prohibited modifications, welding, lifting people, and exceeding operational limits.
Refers to website or catalog for warranty period and conditions.
Explains risk levels and effects of signal words (TIP, ATTENTION, CAUTION, WARNING, DANGER).
General safety advice for handling, transport, storage, and packaging of the product.
Discusses risks associated with automatic controls and system forces.
Lists and defines symbols and abbreviations used throughout the manual.
Explains how to identify the product using the sticker and its components.
Describes the RW motor gearboxes, their transmission, and typical applications.
Details where RW motor gearboxes are used and associated risks.
Provides approximate dimensions and illustrations for various RW models.
Lists mechanical and electrical specifications for different RW series.
States that no special tools are necessary for installation or commissioning.
Illustrates permitted mounting positions for RW45 and RW240/400/600 series.
Explains sprocket types and how to install or interchange them on output shafts.
Outlines general installation conditions, mounting plates, and bolt specifications.
Shows common connections using basic output shafts (BOS) to operated systems.
Details the procedure for installing chains onto sprockets for specific options.
Provides installation options for TRA drive-units on specific RW models.
Explains installation of belt drums onto RW45L/RW240/400L drive units.
Details the installation of cable drums onto RW45L/RW240/400L drive units.
Instructions on removing and reinstalling covers for access to components.
Guidelines for cables, conductor cross-sections, and cable glands.
Safety requirements for electrical connections and protection.
Specifies tightening torques for motor connection bolts.
Provides a wiring diagram for the control circuit.
Explains how to change the direction of rotation and switching sense.
Information on connecting digital positioning meters or potentiometers.
Outlines conditions for normal operation and safety during use.
Illustrates directions of rotation and related limit switches for different models.
Describes operation with manual or automatic control systems.
Lists the safety and stop functions of the RW motor gearbox.
Stresses knowing RSU limit-switch system and following procedures.
Details the procedure for adjusting the limit-switch system's end positions.
Instructions for refitting covers after work to maintain protection.
Recommends checks every six months for operation, leaks, and mechanical condition.
Lists common malfunctions and their solutions for RW motor gearboxes.
Step-by-step guide for safe temporary or permanent decommissioning.
Guidance on proper disposal of products and materials after disassembly.
General
