To Next PageTo Next Page
Need help?Do you have a question about the Ridder RB40 and is the answer not in the manual?
Provides detailed technical data including output, voltage, current, and dimensions.
Lists and describes various accessories for enhancing tube motor functionality.
Clarifies the meaning of terms used in diagrams and descriptions for Ridder tube motors.
Instructions for correctly aligning and securing the tube motor's guiding unit.
Step-by-step guide on how to physically connect the tube motor to the winding tube.
Details the process of attaching the tube motor to its designated guiding system.
Guidance on installing protective measures for the motor's electrical cable.
Methodology for setting the initial reference point for motor travel.
Procedure for securing the shading screen to the winding tube and motor.
Instructions for correctly mounting the protective casing for the motor cable.
Overview of the steps involved in adjusting the complete tube motor system.
Detailed steps for setting and calibrating the motor's limit switches accurately.
Steps to verify correct operation and limit switch engagement after adjustment.
Wiring instructions for the 4-core cable to ensure proper motor rotation.
Explanation of the safety feature that prevents motor overheating during prolonged use.
Critical safety information regarding the prohibition of parallel motor connections.
Diagnosing common issues when the tube motor does not turn on or run.
Identifying causes and solutions for directional control problems with the motor.
Troubleshooting why the motor fails to halt at the programmed limit positions.
General
