To Next PageTo Next Page
Need help?Do you have a question about the Ridder RW240/400 and is the answer not in the manual?
Steps to correctly set the RSU limit switch system of an RW motor gearbox are described.
Details the compatible currents and voltages for the RSU limit switch system contacts.
Description of the linear switch system for RW motor gearboxes, driven by output shaft.
Motor gearbox with RSU delivered with switch followers; adjustment rings need fastening.
Explains the transmission mechanism, switch follower movement, and tripping of duty/safety switches.
Procedure for setting the 'start position' and 'end position' for the RSU limit switch system.
Warning about exceeding limit positions after setting, which can damage the system.
Illustrates different directions of rotation for the motor gearbox with RSU limit switch system.
General
