EasyManuals Logo

Ride COMMAND User Manual

Default Icon
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
DISPLAY BRIGHTNESS
From the Controls tab, select display brightness by moving the touchscreen
slider to the left or right. Press the AUTO check box to allow the screen to adjust
automatically based on ambient light conditions.
LOCK VEHICLE BUTTON
If your vehicle is equipped with a pin activated security system (P.A.S.S.), the
Lock Vehicle button will appear on the Badge Panel. Press this button to lock the
vehicle before powering off the engine. To unlock your vehicle, you will be
prompted to enter a preset passcode. To set up P.A.S.S., see Pin Activated
Security System (if equipped).
NOTICE
The P.A.S.S. feature must be activated by your dealer using Polaris Digital
Wrench. See dealer for setup and activation.
ALL SETTINGS BUTTON
Press the All Settings button to navigate to the settings menu. For more
information about the settings menu, see Settings.
MUSIC SCREEN
NOTICE
Your snowmobile is not equipped with a speaker system. Audio can only be
transmitted through a Bluetooth® media device or headset. Only one device
and one headset can be connected at a time.
19
RIDE COMMAND DISPLAY

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ride COMMAND and is the answer not in the manual?

Ride COMMAND Specifications

General IconGeneral
BrandRide
ModelCOMMAND
CategoryMonitor
LanguageEnglish