Ride COMMAND User Manual

RIDE COMMAND DISPLAY
INTRODUCTION
Thank you for purchasing a RIDE COMMAND Display, and welcome to the
Polaris RIDE COMMAND App. This intuitive display gives you access to your
vehicle’s custom information and a variety of features.
For a safe and enjoyable riding experience with your new Display, please read
your vehicle’s owner’s manual and this Display owner’s manual. If you should
need additional assistance with Display operation or software updates, please
see your Polaris dealer or visit polaris.com/ridecommand.
For the latest information about your RIDE COMMAND Display, including
software updates, please visit ridecommand.polaris.com.
WARNING
Do not enter information while operating your vehicle. Failure to pay attention
to operating your vehicle could result in loss of control, injury, or death. You
assume all risks associated with using this device. Read your User Guide.
Always ride with the latest maps and trails data from https://ridecommand.
polaris.com/en-us/update.
BEFORE YOU RIDE
Before riding with your new display, do the following:
• Read this entire manual.
• Familiarize yourself with the features and operations of the Display while the
vehicle is stationary.
• Download the Polaris Ride Command App from the Apple® App store or the
Google Play® store and create your personalized Ride Command account.
• Check your display to ensure you have the appropriate maps and trails visible
for your area.
• Check https://www.polaris.com/en-us/owners-manuals/ for the latest updates
to the owner’s manual.
• Complete the pre-ride checklist.
NOTICE
Trails change often, and the trail data file is only considered valid for 90 days
after the release date. Please keep your trail data up to date. Download the
latest trails at http://ridecommand.polaris.com.
1
RIDE COMMAND DISPLAY

Ride COMMAND Specifications

General

Brand	Ride
Model	COMMAND
Category	Monitor
Language	English

Summary

INTRODUCTION

BEFORE YOU RIDE

DEVICE OPERATING REQUIREMENTS

TOUCHSCREEN DISPLAY COMPLIANCE STATEMENT

RADIO COMPLIANCE STATEMENTS

VEHICLE-TO-VEHICLE COMMUNICATION (V2V)

OVERVIEW

RIDE COMMAND BUTTONS

LEFT HAND CONTROLS

GAUGE SCREEN

CONFIGURE GAUGE SCREEN

GAUGE VIEW MODE

ICON BAR

BADGE PANEL

ACCESSING THE BADGE PANEL

Describes the two methods to open the Badge Panel: using the Polaris icon or the Polaris Button.

FEATURES

CONTROLS TAB

APP TRAY

Provides quick access to key features like maps and audio.

DISPLAY MODE

Allows selection of display mode: Day, Night, or AUTO.

POLARIS BUTTON

NOTIFICATIONS TAB

ENGINE OVERHEAT INDICATOR

HEATED GRIPS

FUEL TYPE

DISPLAY BRIGHTNESS

LOCK VEHICLE BUTTON

ALL SETTINGS BUTTON

MUSIC SCREEN

DEVICE REQUIREMENTS

PHONE SCREEN

CONNECT YOUR PHONE TO THE DISPLAY

IPHONE

Instructions for connecting an iPhone via Bluetooth.

ANDROID

Instructions for connecting an Android device via Bluetooth.

CONNECTING YOUR BLUETOOTH® HEADSET WITH THE DISPLAY

MAP SCREEN

ZOOM

MAP ORIENTATION

WAYPOINTS

POINTS OF INTEREST (POI)

GO TO NAV

GROUP RIDE

GROUP RIDE SETUP

MOBILE PHONE GROUP RIDE

VEHICLE TO VEHICLE (V2V) ANTENNA

JOINING A RIDE GROUP

RIDING WITH A GROUP

CREATING A RIDE GROUP

SETTINGS

VEHICLE INFORMATION

View VIN, software version, mileage, and engine hours.

GENERAL SETTINGS

Configure account, Bluetooth, language, units, and software updates.

TIME SETTINGS

Set time zone, date, and time format.

VEHICLE SETTINGS

Access diagnostics, GPS status, and fuel type.

PIN ACTIVATED SECURITY SYSTEM (IF EQUIPPED)

ENABLE P.A.S.S.

Steps to activate the PIN Activated Security System.

DISABLE P.A.S.S.

Steps to deactivate the PIN Activated Security System.

MAINTENANCE

CARE AND MAINTENANCE

Instructions for cleaning the display screen and shell.

VEHICLE STORAGE

Precautions for storing the vehicle.

SPEED LIMITATION

Mentions limitations of certain features at high speeds.

UPDATE SOFTWARE

ERROR MESSAGES

Troubleshooting steps for software update errors.

UPDATE MAPS

Instructions for updating the display's map data.

USB HARDWARE

USB PORT