RIDGID AC9960 - User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
MITER SAW STAND
SUPPORT POUR SCIE À ONGLETS
PEDESTAL PARA SIERRA
INGLETEADORA
AC9960
To register your RIDGID
product, please visit:
register.ridgidpower.com
Pour enregistrer votre produit de
RIDGID, s’il vous plaît la visite :
register.ridgidpower.com
Para registrar su producto de
RIDGID, por favor visita:
register.ridgidpower.com
TABLE OF CONTENTS
****************
 Rules for Safe Operation ....................2

Symbols ..............................................3

Features ..............................................4

Tools Needed .....................................4

Loose Parts ........................................5

Assembly .........................................5-9

Operation .......................................9-10

Maintenance ................................10-11

Parts Ordering/Service ....... Back Page
TABLE DES MATIÈRES
****************
 Règles pour la sécurité d’utilisation ......2

Symboles ............................................3

Caractéristiques ...................................... 4

Outils nécessaires ..............................4

Pièces détachées ...............................5
Assemblage
.....................................5-9

Utilisation .......................................9-10

Entretein ......................................10-11

Commande de pièces /
réparation
..........................Page arrière
ÍNDICE DE CONTENIDO
****************
Reglas para el manejo seguro de la
unidad ................................................2
Símbolos
............................................3
Características
...................................4
Herramientas Necesarias
...................4
Piezas Sueltas
....................................5
Armado
............................................5-9
Funcionamiento
.............................9-10

Maintenimiento ............................10-11
Pedidos de piezas/
servicio
.......................... Pág. posterior
WARNING:
To reduce the risk of injury, the user
must read and understand the op-
erator’s manual before using this
product.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation
avant d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el
usuario debe leer y comprender el
manual del operador antes de usar
este producto.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE

Summary

Rules for Safe Operation

Symbols

Features

Tools Needed

Loose Parts

Assembly

Unpacking

Process of removing and checking parts from the box.

Attaching the Handle

Instructions for installing the carry handle onto the stand.

Assembly

Installing the Wheels

Steps to attach the wheels to the stand for mobility.

Installing Material Supports

How to attach material supports for workpiece stability.

Assembly

Attaching Saw Mounting Brackets

Steps to secure the saw to the stand's mounting brackets.

Mounting the Miter Saw to the Stand

Procedure for lifting and attaching the saw assembly to the stand rails.

Assembly

Securing the Saw and Brackets

Ensure brackets are locked and saw is properly seated for stability.

Operation

Applications

Describes the primary use of the miter saw stand.

Using the Extension Rails

Instructions for extending the stand's rails for larger workpieces.

Using the Material Supports

How to use material supports for workpiece resting.

Operation

Closing the Stand

Steps to fold the stand for storage or transport.

Transporting the Stand with a Saw

Guidance on moving the stand while a saw is mounted.

Maintenance

General Maintenance

Advice on cleaning and care of the stand's plastic parts.

Maintenance

Bracket Adjustment Screw

How to adjust the saw mounting bracket fit for secure attachment.

RIDGID AC9960 Specifications

General

Brand	RIDGID
Model	AC9960
Category	Racks & Stands
Language	English