EasyManua.ls Logo

RIDGID DE 18V - User Manual

RIDGID DE 18V
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre
produit de RIDGID,
s’il vous plaît la visite :
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18V BRAD NAILER
CLOUEUSE À PARQUET DE 18V
CLAVADORA DE PUNTILLAS DE 18V
R09890
TABLE OF CONTENTS
****************
General Power Tool
Safety Warnings .......................2-3
Nailer Safety Warnings .............3-5
Symbols ....................................... 6
 Glossary of Terms ........................ 7
 Features ....................................... 8
Assembly ..................................... 8
Operation ................................8-11
Accessories ............................... 11
Troubleshooting ......................... 11
Maintenance .............................. 12
Illustrations ............................13-15
Parts Ordering
and Service ...................Back page
TABLE DES MATIÈRES
****************
Avertissements de sécurité
relatives aux outils électriques ....2-3
Avertissements de
sécurité relatifs cloueuse .............3-5
Symboles ........................................ 6
 Glossaire ......................................... 7
 Caractéristiques ............................. 8
Assemblage .................................... 8
Utilisation ...................................8-11
Accessoires .................................. 11
Dépannage ................................... 11
Entretien ....................................... 12
Illustrations ..............................13-15
Commande de pièces
et réparation .................. Page arrière
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad
generales para la herramienta
eléctrica ......................................2-3
Advertencias de
seguridad para clavador .............3-5
Símbolos ........................................6
Glosario de Términos .....................7
Características ...............................8
Armado ..........................................8
Funcionamiento ........................8-11
Accesorios ...................................11
Corrección de problemas ............11
Mantenimiento ............................. 12
Ilustraciones ............................13-15
Pedidos de
piezas y servicio........ Pág. posterior
WARNING:
To reduce the risk of injury, the
user must read and understand
the operator’s manual before
using this product.
AVERTISSEMENT :
Pour réduire les risques de
blessures, l’utilisateur doit lire
et veiller à bien comprendre
le manuel d’utilisation avant
d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de
lesiones, el usuario debe leer
y comprender el manual del
operador antes de usar este
producto.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE

Questions and Answers

  • M
    mallory78Aug 20, 2025
    Why RIDGID DE 18V tool jams frequently?
    • X
      Xavier SchultzAug 20, 2025
      Frequent jamming of the RIDGID Nail Gun can occur due to several reasons. First, verify that you are using the correct size of nails. Second, replace any damaged nails. A loose magazine can also cause jams, so tighten the screws. Lastly, a dirty magazine can be the culprit, so ensure you clean it.
  • N
    Nicole JenkinsAug 22, 2025
    How to fix RIDGID DE 18V Nail Gun if work-contacting element does not depress fully and tool does not operate?
    • L
      Linda EwingAug 22, 2025
      If the work-contacting element on your RIDGID Nail Gun doesn't depress fully and the tool doesn't operate, it could be due to low nails. Remove the battery and replenish the nails. Alternatively, the work-contacting element might be jammed. In that case, remove the battery and clear any debris.
  • M
    Maria ButlerAug 25, 2025
    Why does my RIDGID DE 18V not drive nails all the way?
    • W
      Wayne PerryAug 25, 2025
      If your RIDGID Nail Gun operates properly, but fasteners do not drive fully, it could be due to several reasons. First, ensure that the air power is sufficient; if it's too low, increase it. Next, check the depth of drive and adjust if it isn't deep enough. Also, verify that the nail length is appropriate for the wood's hardness. If the issue persists, the piston seals might be worn or damaged, requiring a maintenance kit to replace them.
  • J
    joshuaadamsAug 26, 2025
    Why does my RIDGID DE 18V keep jamming?
    • J
      Jennifer CaldwellAug 26, 2025
      If your RIDGID Nail Gun jams frequently, there are several potential causes. First, ensure you are using the correct size nails. If the nails are damaged, replace them with new ones. Check if the magazine is loose and tighten the screws if necessary. Lastly, a dirty magazine can also cause jams, so clean it thoroughly.
  • C
    Cynthia MoralesAug 28, 2025
    How to fix a RIDGID DE 18V when the work-contacting element does not depress?
    • J
      Jennifer WebbAug 28, 2025
      If the work-contacting element on your RIDGID Nail Gun does not depress fully and the tool doesn't operate, it could be due to low nails. Remove the battery and replenish the nails. Alternatively, the work-contacting element might be jammed. In this case, remove the battery and clear any debris.
  • A
    Angela HessAug 30, 2025
    Why is my RIDGID DE 18V Nail Gun tool operating properly, but fasteners do not drive fully?
    • V
      Veronica HensonAug 30, 2025
      There are several potential reasons why your RIDGID Nail Gun might not be driving fasteners fully. It could be due to low air power, which can be resolved by increasing the air power. Alternatively, the depth of drive might not be deep enough, requiring an adjustment. The nail might be too long for the wood's hardness, in which case you should use a nail length appropriate for the wood. Finally, worn or damaged piston seals could be the culprit, necessitating the replacement of one or both pistons using a maintenance kit.
  • P
    patrick46Sep 1, 2025
    What to do if my RIDGID Nail Gun tool jams frequently?
    • T
      Tina RobinsonSep 1, 2025
      If your RIDGID Nail Gun is jamming frequently, there are several possible causes. First, ensure that you are using the correct size of nails. Second, check the nails for damage and replace them if necessary. Also, inspect the magazine to see if it is loose and tighten the screws if needed. Finally, a dirty magazine can also cause jams, so clean it thoroughly.
  • P
    pbauerSep 3, 2025
    How to fix a RIDGID Nail Gun when the work-contacting element does not depress fully and the tool does not operate?
    • D
      David StewartSep 3, 2025
      If the work-contacting element on your RIDGID Nail Gun does not depress fully and the tool does not operate, it could be due to low nails. Remove the battery and replenish the nails. Another cause could be that the work-contacting element is jammed. In this case, remove the battery and clear any debris.
  • K
    Kevin LeeSep 5, 2025
    What to do if my RIDGID DE 18V drives nails too deep?
    • J
      Joshua FloresSep 5, 2025
      If your RIDGID Nail Gun is driving fasteners too deep, the air power might be too high; try decreasing it. Alternatively, the depth of drive may be set too deep, so adjust it accordingly.
  • H
    hponceSep 7, 2025
    Why is my RIDGID DE 18V Nail Gun tool operating properly, but fasteners are driven too deep?
    • T
      Tammy BaxterSep 7, 2025
      If your RIDGID Nail Gun is driving fasteners too deep, it could be due to air power being too high. Try decreasing the air power. Another possible reason is that the depth of drive is set too deep. In that case, adjust the depth of drive accordingly.

RIDGID DE 18V Specifications

General IconGeneral
BrandRIDGID
ModelDE 18V
CategoryNail Gun
LanguageEnglish

Related product manuals