EasyManua.ls Logo

RIDGID DE 18V - User Manual

RIDGID DE 18V
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre
produit de RIDGID,
s’il vous plaît la visite :
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18V BRAD NAILER
CLOUEUSE À PARQUET DE 18V
CLAVADORA DE PUNTILLAS DE 18V
R09890
TABLE OF CONTENTS
****************
General Power Tool
Safety Warnings .......................2-3
Nailer Safety Warnings .............3-5
Symbols ....................................... 6
 Glossary of Terms ........................ 7
 Features ....................................... 8
Assembly ..................................... 8
Operation ................................8-11
Accessories ............................... 11
Troubleshooting ......................... 11
Maintenance .............................. 12
Illustrations ............................13-15
Parts Ordering
and Service ...................Back page
TABLE DES MATIÈRES
****************
Avertissements de sécurité
relatives aux outils électriques ....2-3
Avertissements de
sécurité relatifs cloueuse .............3-5
Symboles ........................................ 6
 Glossaire ......................................... 7
 Caractéristiques ............................. 8
Assemblage .................................... 8
Utilisation ...................................8-11
Accessoires .................................. 11
Dépannage ................................... 11
Entretien ....................................... 12
Illustrations ..............................13-15
Commande de pièces
et réparation .................. Page arrière
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad
generales para la herramienta
eléctrica ......................................2-3
Advertencias de
seguridad para clavador .............3-5
Símbolos ........................................6
Glosario de Términos .....................7
Características ...............................8
Armado ..........................................8
Funcionamiento ........................8-11
Accesorios ...................................11
Corrección de problemas ............11
Mantenimiento ............................. 12
Ilustraciones ............................13-15
Pedidos de
piezas y servicio........ Pág. posterior
WARNING:
To reduce the risk of injury, the
user must read and understand
the operator’s manual before
using this product.
AVERTISSEMENT :
Pour réduire les risques de
blessures, l’utilisateur doit lire
et veiller à bien comprendre
le manuel d’utilisation avant
d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de
lesiones, el usuario debe leer
y comprender el manual del
operador antes de usar este
producto.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE

Questions and Answers

  • P
    Patrick BerrySep 9, 2025
    What to do if RIDGID DE 18V operates properly, but fasteners do not drive fully?
    • J
      Jason RodriguezSep 9, 2025
      If the RIDGID Nail Gun operates correctly, but the fasteners aren't fully driven, it could be due to several reasons. First, ensure that the air power is sufficient; if it's low, increase it. Next, check the depth of drive and adjust it if it's not deep enough. Also, verify that the nail length is appropriate for the wood's hardness. Finally, worn or damaged piston seals can cause this issue; in this case, you'll need to replace the pistons, which requires a maintenance kit.
  • J
    Justin GomezSep 12, 2025
    What to do if RIDGID DE 18V Nail Gun tool operates properly, but fasteners are driven too deep?
    • A
      Amanda JonesSep 12, 2025
      If the RIDGID Nail Gun drives fasteners too deep, it could be because the air power is too high; try decreasing it. Alternatively, the depth of drive might be set too deep, so adjust it accordingly.
  • L
    laurajohnsonSep 13, 2025
    Why RIDGID Nail Gun tool stops and LED flashes rapidly?
    • C
      Christian KellerSep 13, 2025
      If the RIDGID Nail Gun stops and the LED flashes rapidly, it's likely due to a low or uncharged battery; try recharging it. Another potential cause is releasing the trigger too early, in which case, remove the battery and reinstall it.
  • H
    Hailey TaylorSep 15, 2025
    What to do if RIDGID DE 18V Nail Gun stops and LED flashes rapidly?
    • M
      Melissa JonesSep 15, 2025
      If your RIDGID Nail Gun stops and the LED flashes rapidly, it could be due to a low or uncharged battery, so try recharging it. Another possibility is that the trigger was released too early; in this case, remove and reinstall the battery.
  • P
    paulscottSep 18, 2025
    What to do if my RIDGID DE 18V stops and the LED flashes rapidly?
    • E
      Eric SingletonSep 18, 2025
      If your RIDGID Nail Gun stops and the LED flashes rapidly, it could be due to a low or uncharged battery; try recharging it. Another possibility is that the trigger was released too early. To resolve this, remove the battery and reinstall it.

RIDGID DE 18V Specifications

General IconGeneral
BrandRIDGID
ModelDE 18V
CategoryNail Gun
LanguageEnglish

Related product manuals