RIDGID K-1500 SP User Manual

RIDGE TOOL COMPANY
GB p. 1
DE p. 5
FR p. 10
NL p. 15
IT p. 20
ES p. 25
PT p. 30
SV p. 35
DA p. 39
NO p. 43
FI p. 47
HR p. 51
PL p. 55
RO p. 60
CZ p. 65
HU p. 69
GR p. 74
RU p. 79
Drain Cleaning
Machines
K-1500 SP
K-1500 G

RIDGID K-1500 SP Specifications

General

Brand	RIDGID
Model	K-1500 SP
Category	Ultrasonic Jewelry Cleaner
Language	English

Summary

General Safety Information

Machine Safety

Follow specific safety guidelines for operating the machine to prevent injury or damage.

Preparing Machine for Operation

Steps to set up the drain cleaning machine before starting operation.

Operating Machine

Procedures for running the drain cleaning machine safely and effectively.

Maintenance Instructions

Moving Parts Lubrication

Grease exposed moving parts like rocker arms and main bearing approximately every three months.

Clutch Jaws Lubrication

Clean and lubricate clutch driver jaws with oil after each use.

Clutch Jaws Replacement

Procedure for replacing clutch driver jaws.

Removing Clutch End Play

Steps to remove end play from the clutch.

V-Belt Adjustment

Check V-Belt periodically for loosening and ensure it is kept tight.

Machine Care

Guidelines for keeping the motor-driven equipment protected from weather.

Cables

Proper flushing, lubrication, and storage of cables to prevent damage.

Service & Repair

Information on where to send the tool for maintenance or repair.

Removing Cable from Pipeline

Safety Handling

Handling Cables

Warning about cables becoming tangled or twisted, and potential for injury.