To Next PageTo Next Page
Need help?Do you have a question about the RIDGID R86001 and is the answer not in the manual?
General| Brand | RIDGID |
|---|---|
| Model | R86001 |
| Category | Impact Driver |
| Language | English |
Keep work area clean and well lit. Avoid explosive atmospheres and keep bystanders away.
Match plugs to outlets, avoid grounded surfaces, rain/wet conditions, and cord abuse.
Stay alert, use PPE, prevent unintentional starting, dress properly, and use dust extraction.
Use correct tool, check switch, disconnect power before adjustments, store properly, maintain tools, keep sharp, use correctly.
Recharge with specified charger, use designated packs, keep away from metal, avoid abusive conditions, do not modify/damage, avoid fire/excessive temperature.
Have tool serviced by qualified personnel using identical replacement parts. Never service damaged battery packs.
Hold by insulated surfaces, use correct speed, apply direct pressure, wear eye/lung/hearing protection.
Hold by insulated surfaces, wear ear protection, do not use as a drill.
Know tool, wear eye protection, protect lungs/hearing, be aware of battery hazards, do not place near heat, handle batteries carefully, save instructions.
Explains DANGER, WARNING, CAUTION, NOTICE signal words and their associated risk levels.
Explains symbols like Safety Alert, Read Operator's Manual, Eye Protection, Wet Conditions, Recycle, etc.
Lists specifications for R86002 Impact Driver, including speed, chuck, impacts, and torque.
Do not use if incomplete or damaged. Do not modify product or use unrecommended accessories.
Do not become careless, remove battery pack when not in use, wear eye protection, use recommended accessories.
How to set the rotation selector for forward, reverse, and center lock positions.
Controls speed by trigger pressure. Tool turns ON/OFF by depressing/releasing trigger.
Instructions on how to insert and remove the battery pack securely.
How to install and remove drill bits using the keyless chuck.
Select low speed for torque/driving screws, high speed for fast drilling.
Steps for drilling and driving screws, including workpiece securing and pressure.
Techniques for drilling wood and metal, including speed, pressure, and lubrication.
Accepts 1/4 in. hex bits. Use only impact quality bits with a locking groove.
Instructions for installing and removing bits using the impact driver's chuck.
Steps for using the impact driver, including bit placement and trigger control.
Clean with clean cloths. Avoid solvents. Use only identical replacement parts.
Contact nearest authorized service center for parts or service. Provide model and serial numbers.
Product has a 90-Day Satisfaction Guarantee and a Three-year Limited Warranty.
