To Next PageTo Next Page
Need help?Do you have a question about the RIDGID R86008 and is the answer not in the manual?
General| Type | Cordless Drill |
|---|---|
| Voltage | 18V |
| Chuck Size | 1/2 inch |
| Max Torque | 650 in-lbs |
| Speed Settings | 2 |
| Power Source | Battery |
| Battery Type | Lithium-Ion |
| Length | 8.5 inches |
Keep the work area clean and well-lit to prevent accidents.
Proper wiring, grounding, and protection from moisture to prevent shock.
Maintain alertness, wear PPE, and avoid improper attire or distractions.
Correct tool usage, maintenance, and safe storage practices.
Safe handling, charging, and storage of battery packs.
Ensure repairs are done by qualified personnel with OEM parts.
Use auxiliary handles, eye protection, and hearing protection.
Explains DANGER, WARNING, CAUTION levels for product risks.
Explains common symbols like Safety Alert, Read Manual, Eye Protection, etc.
Lists key technical details like Chuck, Motor, Speed, Torque, etc.
Emphasizes understanding the tool and project before use.
Explains the selector for forward, reverse, and center lock positions.
Details the hand-tightening mechanism for drill bits.
Explains the 24-position clutch for torque control.
Describes the speed selection for drilling or driving.
Explains the variable speed trigger for speed control.
Instructions for carefully removing and checking product contents.
Guidance on attaching and detaching the auxiliary handle.
Lists the intended uses for the drill-driver.
Explains features that protect lithium-ion batteries.
Steps for inserting and removing the battery pack.
How to turn the drill on and off using the trigger.
Details on controlling speed with trigger pressure.
How to change the drill bit's rotation direction.
Instructions for tightening and loosening drill bits.
Explanation of the clutch for driving screws.
Steps to properly insert and secure drill bits.
Guidance on drilling wood and metal, including safety warnings.
Cleaning instructions using appropriate materials.
Steps for safely removing and preparing battery packs for disposal.
Instructions for removing and replacing the chuck.
Steps to secure a chuck that has become loose.
Details the warranty coverage and duration for the tool.
Policy for returning the tool for refund or exchange within 90 days.
Specifies defects in workmanship or materials covered by warranty.
Procedure for getting warranty service and authorized centers.
Exclusions from warranty coverage, including misuse and consumables.
Legal disclaimers and limitations on implied warranties.
