RIDGID R8611501 User Manual

1 - English
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR’S MANUAL
MANUEL D’UTILISATION/ MANUAL DEL OPERADOR
1/2 in. 18 VOLT HAMMER DRILL
TWO-SPEED/REVERSIBLE
PERCEUSE À PERCUSSION 18 V
DE 13 mm (1/2 po)
2 VITESSES /RÉVERSIBLE
TALADRO DE PERCUSIÓN
DE 13 mm (1/2 pulg.) 18 V
DOS VELOCIDADES/INVERTIBLE
R8611501
Cette perceuse à percussion a été conçue et fabriquée
conformément à nos strictes normes de fiabilité, de simplicité
d’emploi et de sécurité d’utilisation. Correctement entretenue,
elle vous donnera des années de fonctionnement robuste et
sans problème.
Su taladro de percusión ha sido diseñado y fabricado de
conformidad con nuestras estrictas normas para brindar
fiabilidad, facilidad de uso y seguridad para el operador. Con el
debido cuidado, le brindará muchos años de sólido y eficiente
funcionamiento.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
Your hammer drill has been engineered and manufactured to our high standards for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
To register your RIDGID®
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre
produit de RIDGID®,
s’il vous plaît la visite:
http://register.RIDGID.com
Para registrar su producto
de RIDGID®, por favor visita:
http://register.RIDGID.com
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank you for your purchase.
AVERTISSEMENT :
Pour réduire les risques de blessures, l’utilisateur doit
lire et veiller à bien comprendre le manuel d’utilisation
avant d’employer ce produit.
Merci de votre achat.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador antes de usar
este producto.
Le agradecemos su compra.
BATTERIES AND CHARGERS SOLD SEPARATELY
PILES ET CHARGEUR VENDUS SÉPARÉMENT
LAS BATERIAS Y LOS CARGADORES SE VENDEN POR SEPARADO

RIDGID R8611501 Specifications

General

Brand	RIDGID
Model	R8611501
Category	Drill
Language	English

Summary

Introduction

Introduction

Describes the product's features and design priorities for user experience.

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean, well-lit, avoid explosive atmospheres, keep bystanders away.

Electrical Safety

Proper plug matching, avoid body contact with grounded surfaces, keep away from wet conditions.

Personal Safety

Stay alert, use PPE, prevent unintentional starting, do not overreach, dress properly.

Power Tool Use and Care

Do not force, use correct tool, maintain tools, keep cutting tools sharp.

Battery Tool Use and Care

Service

Hammer Drill Safety Warnings

Symbols

California Proposition 65 Warning

Warning about chemicals in product dust, including lead, causing cancer or birth defects.

Features

Product Specifications

Lists technical specifications like chuck size, motor, speed, blows per minute, torque.

Key Operating Controls

Explains controls like mode selector, direction, speed trigger, and torque adjustment.

Performance and Convenience Features

Details performance aspects and convenience features like chuck, light, storage, and handle.

Assembly

Unpacking and Packing List

Instructions for unpacking the product and checking included items.

Operation

Auxiliary Handle Assembly Installation

Step-by-step instructions for installing and removing the auxiliary handle.

Applications and Battery Features

Lists intended uses and explains battery protection features and tool behavior.

Operation

Battery Pack Installation and Removal

Instructions for installing and removing the battery pack.

Controls: Switch, Speed, and Rotation

Explains the operation of the switch trigger, variable speed, and rotation selector.

Keyless Chuck and LED Light

Describes the keyless chuck and the operation of the LED light.

Operation

Two-Speed Gear Train Operation

Details the two-speed gear train for different applications and torque.

Adjustable Torque Clutch and Adjustment

Explains the adjustable torque clutch and how to adjust torque for screw driving.

Mode Selection and Bit Installation

Guides on choosing modes and step-by-step instructions for installing bits.

Operation

Drilling Applications

Instructions for wood, metal, and masonry drilling, including speed and pressure tips.

Maintenance

General Maintenance and Cleaning

Guidelines for cleaning plastic parts and avoiding damaging chemicals.

Battery Pack Removal and Recycling

Instructions for safely removing and preparing battery packs for recycling.

Chuck Maintenance

Steps for removing, replacing, and retightening the drill chuck.

Warranty

3 Year Limited Service Warranty

Outlines the 3-year limited service warranty terms and conditions.

90-Day Satisfaction Guarantee

Explains the 90-day satisfaction guarantee policy for returns or exchanges.

Obtaining Service and Warranty Limitations

Details how to get service and the scope/limitations of the warranty.

Customer Service Information