To Next PageTo Next Page
Need help?Do you have a question about the RIDGID R8611503 and is the answer not in the manual?
General| Model | R8611503 |
|---|---|
| Category | Drill |
| Type | Hammer Drill |
| Voltage | 18V |
| Chuck Size | 1/2 in. |
| Brushless Motor | Yes |
| Battery Included | No |
| No-Load Speed | 0-2000 RPM |
Keep area clean, avoid sparks, and heed electrical precautions regarding plugs, grounding, water, and cords.
Stay alert, use PPE, avoid overreaching, dress properly, and maintain balance.
Guidelines for proper operation, maintenance, and storage of power tools.
Specifics on charging, handling, and storing battery packs.
Warnings about battery handling, heat, fire, explosions, and damage.
Guidance on tool servicing, repairs, and saving instructions.
Use ear protection and auxiliary handle for control and safety.
Safety when contacting wires and understanding tool hazards.
Always wear eye, lung, and hearing protection.
Awareness of hazards with battery tools in operation.
Explains risk levels associated with signal words like DANGER, WARNING, CAUTION.
Defines symbols used on the product and their meanings.
Technical details like speed and impact ratings.
Steps for safely removing the tool and accessories from the box.
Instructions for installing and removing the auxiliary handle.
General warnings and a list of product applications.
How to use the variable speed trigger for ON/OFF control.
How to set the rotation direction (forward/reverse/lock).
Steps for inserting and removing the battery pack.
Instructions for inserting and removing drill bits.
Description of the LED light function.
How to select between high and low speeds for different applications.
How to adjust the torque setting for driving screws.
Guidance on choosing the correct mode for the application.
Steps for drilling holes and driving screws.
Procedures for drilling in wood and metal.
Procedures for drilling in masonry materials.
Safety warnings regarding servicing and California Proposition 65.
Advice on cleaning plastic parts.
Steps for safely removing the tool and accessories from the box.
Instructions for installing and removing the auxiliary handle.
