7
1200 Series SmartPanels 1.1 User Manual
01-000HB03EG-B00
1.3
Firmware Version
This Manual refers to the 1200 series SmartPanels with the firmware version: 1.1.x
The “x” in the firmware version indicates the bugfix version that is described in the related release notes.
The firmware version can be checked in the SmartPanel and in the web interface:
SmartPanel
Ø
Touch the gear icon in the Info-display.
Ø
Navigate with the small bottom rotary encoder to the
menu: 'Device-Info'.
Ø
Push the small rotary encoder.
The second line in the Info-display shows the SmartPanel's
firmware and bugfix version.
figure 1: firmware version
(SmartPanel)
Web-Interface
Enter the IP address of the AES67 interface (Ethernet
connectors) of the SmartPanel in the web browser of a PC on
the same network.
The IP addresses of the SmartPanel are displayed
in the Panel-Menu > Network > AES67.
figure 2: IP address of the
SmartPanel
Open the web interface of the
SmartPanel:
·
Enter the IP address in the web
browser
(e.g. 192.168.41.159).
figure 3: web interface of the SmartPanel
The web interface opens.
·
Open on the right side the main
menu (
) and select 'Firmware
Update'.
figure 4: Firmware Update
The firmware manager is opened.
The firmware version of the
SmartPanel is displayed next to its IP
address.
figure 5:firmware version (web interface)
To Next Page
Loading...
Need help?
General
