Need help?Do you have a question about the Riello AMD AN Series and is the answer not in the manual?
General| Brand | Riello |
|---|---|
| Model | AMD AN Series |
| Category | Air Conditioner |
| Language | English |
Important initial advice for safe handling and setup of the unit.
Details on the indoor unit's characteristics, including exchanger, filters, and motor.
Description of the wired control panel and its function for unit operation.
Locating and understanding the unit's technical and performance data tag.
Specifications for airflow and noise levels in cooling mode.
Specifications for airflow and noise levels in heating mode.
General technical details and power consumption of the unit.
Detailed measurements and weights of the indoor unit.
Specifications for the unit's packaging size and weight.
Diameters and torque specifications for liquid, gas, and condensate connections.
Key for wire colors used in electrical diagrams for specific models.
Key for wire colors used in electrical diagrams for specific models.
Advice on handling the unit upon delivery and removing packaging.
List of items supplied with the air conditioning unit.
Guidelines for skilled technicians on safely moving and transporting the unit.
Criteria for choosing the optimal installation location considering technical and regulatory requirements.
Checks for wall support, avoiding obstructions, and recommended environmental conditions.
Requirements for ducting air intake/outflow and access for maintenance.
Steps for attaching support rods and securing the unit with nuts and bolts.
Ensuring the correct slope for proper condensate drainage to prevent leaks.
Guidelines for dimensioning ducts, using antivibration joints, and ensuring filter access.
Connecting the fan motor based on delivery duct length using specified connectors.
Ensuring a proper drain trap for air prevention and odor control.
Steps for connecting the insulated drainage tube with proper slope and insulation.
Guidelines for refrigerant line sizing, support, and ensuring good joint seals.
Procedure for connecting the liquid and gas lines to the unit.
Checks for electrical network suitability, voltage, and phase balance.
Requirements for circuit breakers, disconnectors, and grounding.
Procedure for connecting indoor and outdoor units using specified cable types.
Guidelines for installing the control panel on a wall and its placement.
Steps for threading the cable and connecting it to the control panel terminals.
Checks to ensure safety conditions and correct connections before initial start-up.
Instructions for setting internal microswitches for model and static pressure selection.
Steps to power on the unit and verify its operation in different modes.
Explanation of the unit's ability to automatically restart after a power interruption.
Procedure to adjust static pressure using SW1 microswitches.
Importance of regular maintenance and recommended intervals.
List of routine checks and operations for annual maintenance.
Detailed steps for removing, cleaning, and drying the unit's mesh filters.
Steps to take when an anomaly occurs, including waiting periods and cause removal.
Explanation of alarm codes displayed on the control panel and their meaning.
To Next Page