AARIA
58
disconnecting the unit from the power grid
by positioning the system’s main switch in
the “off” position.
Cleaning of AMK N mesh filters
Release the latches to the screen.
Open the screen.
Unlatch the hinges
Remove the screen.
Take out the mesh filter pulling on the
provided fins.
Remove dirt using a vacuum cleaner.
If badly soiled, wash it with lukewarm
water (max. 40°C) and a neutral detergent;
rinse well and let it dry in the shadow.
In order to reposition, proceed in the
reverse direction.
If exposed to the sun or washed with water
at a temperature of more than 40°C, the
filters may shrink.
Do not use the unit without the mesh filter.
To Next Page
Loading...
