To Next PageTo Next Page
Need help?Do you have a question about the Riello Caldariello Condens 25 KIS E and is the answer not in the manual?
General| Fuel Type | Gas |
|---|---|
| Max Heat Output | 25 kW |
| Max working pressure | 3 bar |
| Fuel | Natural Gas or LPG |
| Electrical connection | 230 V, 50 Hz |
Guidelines for proper boiler installation by qualified personnel.
Specifies required clearances and optimal placement for the boiler.
Procedures for cleaning the heating system and water quality checks.
Instructions for mounting the boiler and connecting hydraulic pipes.
Guidance on installing and wiring the external temperature sensor.
Steps for connecting condensate drain, gas supply, and electrical wiring.
Procedures for filling and draining the heating system and DHW.
Requirements for flue gas discharge and air intake connections.
Details on various flue gas discharge and air suction configurations.
Step-by-step guide to powering up and initiating the boiler.
Adjusting heating/DHW temperatures and selecting operating modes.
Enables faster domestic hot water delivery by keeping the exchanger warm.
Function for automatically adjusting heating water temperature based on room thermostat.
Procedures for resetting the boiler and temporary/long-term shutdown.
Explanation of LED indicators and error codes for boiler status.
Steps to resolve specific faults and reset the boiler.
Setting operational parameters using jumpers on the electronic board.
Adjusting heating curves using external sensor and trimmer P3.
Procedures for adjusting boiler parameters like gas valve settings.
Detailed steps for calibrating the gas valve for optimal performance.
Instructions for converting the boiler between gas types.
Procedure for analyzing and verifying combustion efficiency.
Location and importance of the boiler's unique serial number.
Indicator light for boiler operational status (on, off, standby).
Shows operating temperature, fault codes, and system status.
Control for switching between heating, DHW, and off modes.
Setting the desired domestic hot water temperature.
Indicates the pressure level in the heating system.
Explanation of various symbols shown on the boiler display.
