To Next PageTo Next Page
Need help?Do you have a question about the Riello Gulliver BG1 and is the answer not in the manual?
Details components like flange, insulating gasket, screws, nuts, and oil pipes.
Describes optional software diagnostic and remote reset kits for the burner.
Lists output, thermal power, fuel, electrical supply, and motor specifications for different models.
Provides dimensional drawings and a table of measurements for various burner types.
Graphical representation of firing rate versus combustion chamber pressure for different burner models.
Specifies allowed and prohibited installation positions for optimal burner operation and safety.
Instructions and figures for attaching the burner flange to the boiler door.
Guidance on connecting oil supply pipes, including reversing plates.
Details two-pipe vs. one-pipe systems, priming procedures, and oil pipe requirements.
Diagram and instructions for the burner's electrical connections and control box.
Guidance on adjusting combustion by selecting nozzles, pump pressure, and air damper settings.
Specifies the recommended nozzle type for the burner.
Instructions for adjusting electrode position for optimal ignition.
Describes how to access the nozzle, diffuser disc, and electrodes for maintenance.
Instructions for adjusting the air damper setting for optimal combustion.
Procedure for setting slots to reduce burner pulsations during startup.
Information on factory pump pressure setting and adjustment.
Details on adjusting the flame detector sensitivity using potentiometers and LEDs.
Explanation of the oil pre-heater function for regular ignition at low temperatures.
Overview of the burner's operating sequences, including preheating and lockout times.
Explains how to use the control box's LED diagnostic function to identify malfunctions.
Lists common start-up faults, their possible causes, and recommended solutions.
Addresses issues encountered during normal burner operation, like flame loss.
Information on the identification plate and its importance for safe installation.
Essential safety precautions for operating and maintaining the burner.
General