Need help?Do you have a question about the Riello GULLIVER RG1 and is the answer not in the manual?
General| Type | Gas Burner |
|---|---|
| Fuel | Natural gas |
| Electrical supply | 230V, 50Hz |
| Efficiency | Up to 92% |
| Stages | Single Stage / Two Stage (depending on model) |
Lists essential physical components of the burner, including flange, fasteners, and plugs.
Details burner output, fuel type, electrical requirements, motor, and pump specifications.
Provides graphical representations and measurements of the burner's physical size.
Illustrates the relationship between firing rate and combustion chamber pressure.
Step-by-step guide for securely attaching the burner flange to the boiler.
Instructions for connecting the oil supply pipes to either side of the burner.
Details on pump operation, priming methods, and pipe system requirements.
Provides a diagram and guidelines for the burner's electrical connections.
Guidance on adjusting combustion parameters like nozzle, pump pressure, and air damper.
Lists specific nozzle models suitable for various operating conditions.
Instructions for adjusting the diffuser disc and electrode positions for ignition.
Details on how to adjust the pump pressure using the designated screw.
Procedure for setting the combustion head based on burner output.
Instructions on how to adjust the air damper for optimal airflow.
Illustrates normal and failure sequences during burner ignition.
To Next Page
