To Next PageTo Next Page
Need help?Do you have a question about the Riello Gulliver RG0.2R and is the answer not in the manual?
General| Burner Type | Monoblock |
|---|---|
| Firing Rate Max (kW) | 35 |
| Power Supply | 230V, 50Hz |
| Burner Output (kW) | 35 |
| Motor Power | 0.09 kW |
| Nozzle Pressure | 7 bar |
Details the components included with the burner, such as flanges, screws, and pipes.
Provides specifications for output, thermal power, fuel, electrical supply, motor, capacitor, and pump.
Includes diagrams illustrating the burner's physical dimensions and measurements.
Presents a graph showing the burner's operating ranges based on pressure and output.
Instructions and diagrams for securely mounting the burner to the boiler unit.
Illustrates the correct setup for oil supply pipe entry into the burner.
Guidance on setting up oil supply systems, including 2-pipe and 1-pipe configurations.
Provides the electrical wiring diagram and essential notes for correct connection.
Details on setting combustion parameters like nozzle, pressure, and air damper.
Lists compatible nozzle types and manufacturers for optimal performance.
Explains how to easily access the nozzle, diffuser disc, and electrodes for maintenance.
Step-by-step instructions for correctly positioning and adjusting the ignition electrodes.
Information on the factory-set pump pressure and how to adjust it.
Procedure for adjusting the combustion head by rotating a setting screw.
Instructions on how to adjust the air damper setting for optimal combustion.
Description of the oil pre-heater function for reliable ignition at low temperatures.
Illustrates the normal start-up sequence and lock-out sequence due to failure.
