To Next PageTo Next Page
Need help?Do you have a question about the Riello Gulliver RG3 and is the answer not in the manual?
Lists the components included with the burner, such as flange, gasket, screws, and pipes.
Provides technical specifications like output, fuel type, electrical supply, motor, and pump details.
Presents dimensional drawings and measurements of the burner unit.
Displays a graphical representation of the burner's operating range based on output and pressure.
Details the procedure for attaching the burner flange and ensuring proper inclination.
Explains how to connect the oil supply pipes, including plate reversal for different orientations.
Describes the two-pipe and one-pipe configurations and priming procedures for the fuel pump.
Details the wiring diagram, connections, and testing procedures for the burner's electrical system.
Guides on adjusting combustion based on nozzle, pump pressure, head setting, and air damper.
Lists recommended nozzle types and provides instructions for fitting them.
Explains how to adjust the electrodes for proper ignition and combustion.
Details how to check and adjust the pump pressure for optimal performance.
Describes how to set the combustion head for the correct air-fuel mixture.
Explains how to adjust the air damper for optimal combustion air supply.
Illustrates the normal and lock-out sequences during burner ignition.
Outlines periodic maintenance tasks, basic checks, and combustion verification.
Lists common faults, their possible causes, and recommended solutions for the burner.
Explains the importance of the identification plate for serial number, model, and data.
Provides essential safety rules for users, covering operation, cleaning, and installation environment.
General