Riello RL Series - 4.3.2 Max. dimensions (Fig. 2); 4.3.3 Standard equipment

9
20111051
GB
Technical description of the burner
4.3.2 Max. dimensions (Fig. 2) -
approximate measurements
The maximum dimensions of the burner are given in (Fig. 2).
Bear in mind that inspection of the combustion head requires the
burner to be opened and the rear part withdrawn on the slide
bars.
The dimensions of the open burner are indicated by position I.
(1)
Blast tube: short-long
4.3.3 Standard equipment
2 - Flexible hoses
2 - Gaskets for flexible hoses
2 - Nipples for flexible hoses
1 - Thermal insulation screen
2 Extensions 15)(Fig. 1) for slide bars 5)(Fig. 1)
(for models with 385 mm blast tube)
4 - Screws to secure the burner flange to the boiler: M 12 x 35
2 - Nozzles
1 - Instruction booklet
1 - Spare parts list
Fig. 2
D686
mm A B C D E
F
(1)
G H
I
(1)
RL 70 580 296 284 555 680 250 - 385 179 430 951 - 1086
RL 100 599 312 287 555 680 250 - 385 179 430 951 - 1086
RL 130 625 338 287 555 680 250 - 385 189 430 951 - 1086